Linia produkcyjna dla:
Linie produkcyjne chłodziarek do napojów zaufane przez globalnych rozlewców
We manufacture beverage cooler production lines to bottler spec — single to triple-door, 200 to 1,500 L, up to 8,000 units/day.
In one line
Fast-cycle foaming moulds reduce door production time by up to 30%.
Czego potrzebujesz
Hardware & Accessories — Bundled with Main Equipment Orders
Complementary hardware fabrication service — supplied alongside our main equipment orders (moulds / PU foaming / production line). Custom-fabricated per your drawings: 5 categories — hinges, brackets, rails & ladders, wire shelves & baskets, grid panels. Not a standalone product line. Consolidated into your main shipment.
Dowiedz się więcej
6/8/11-Station Refrigerator Cabinet Foaming Line
Linear PU foaming line for refrigerator cabinet bodies, configured with 6, 8 or 11 stations. Station count, fixture cavities, takt and curing dwell are selected from the approved cabinet drawings, PU process, model mix and target output. Cabinet and door capacities are calculated separately.
Dowiedz się więcej
Mold for Upright Glass-Door Display Cabinet
Refrigerator mould (mold) for display cabinets — cast aluminium PU foaming mould for single / double / triple glass-door beverage display cabinets and supermarket display refrigerators. Up to 1,900 × 700 × 1,300 mm, ~30 s/shot.
Dowiedz się więcej
PU Raw Materials System
We make refrigerator-grade PU systems — polyol blend, MDI, blowing agent, all formulated in our own plant. k-factor down to 0.018, density customizable, tuned to your cabinet and your line.
Dowiedz się więcejCabinet models you can produce on this line
Every row below is a real cabinet SKU that customers already produce using the moulds in this line — temperature class, capacity, compressor, refrigerant and overall dimensions are field-tested. Use the matrix to match your target cabinet to the right mould configuration.
| Cabinet model | Variant | Temperature (°C) | Volume (L) | Power (W) | Weight (kg) | Compressor | Refrigerant | Size (mm) | Source mould |
|---|---|---|---|---|---|---|---|---|---|
| LC-620FX | Single-door refrigeration | -2–8 | 620 | 262 | 75 | DONPER / WANBAO | R290 | 620 × 725 × 2065 | Mold for Upright → |
| LC-1260FX | Double-door refrigeration | -2–8 | 1113 | 374 | 145 | DONPER / WANBAO | R290 | 1260 × 725 × 2065 | Mold for Upright → |
| LD-1260FX | Double-door freezing | ≤-18 | 1066 | 911 | 200 | DONPER / WANBAO | R290 | 1260 × 725 × 2065 | Mold for Upright → |
| LC-1860FX | Triple-door refrigeration | -2–8 | 1685 | 583 | 200 | DONPER / WANBAO | R290 | 1860 × 725 × 2065 | Mold for Upright → |
| LD-1860FX | Triple-door freezing | ≤-18 | 1670 | 1395 | 260 | DONPER / WANBAO | R290 | 1860 × 725 × 2065 | Mold for Upright → |
Source: UREXCEED catalog §07 OEM/ODM cabinet series, cross-referenced to the mould that produces each SKU. Custom cabinet sizes outside this range supported — send us your cabinet drawing for a 7-day quote.
Why This Line Works — Backed by the Real Specifications
Built for high-throughput bottler programs where every door must look identical to the brand standard.
Door cosmetic precision matched to bottler brand specs
Vacuum-formed inner doors hold ±0.3 mm tolerance on glass-ledge alignment — critical when Coca-Cola or Carlsberg brand teams audit cooler aesthetics across 50,000+ deployed units.
Foaming cycle 90 s for single-door, 180 s for triple-door
High-pressure PU foaming machines (UPM-HP-1500) with optimized injection paths cut door foaming cycle by 25–30% vs. conventional setups, letting a 10,000-unit annual program ship in 6–8 months instead of 9–12.
Capacity 500 to 8,000 units/day on the same backbone
Modular line layout starts at 500 units/day for new bottler programs and scales to 8,000 units/day without redesign. Bottlers piloting in one country can replicate the same line in 3 more without re-engineering.
Energy-efficiency rating support for EU & EAEU markets
Foaming density 35–45 kg/m³ tuned for EU Energy Label class C+ on standard glass-door coolers — the threshold most major bottlers now require for retail placement.
Beverage program engineering
Bottler-Program Cabinet Configuration
Bottler programs (Coca-Cola, Pepsi, Heineken) are 100% spec-driven. 4 axes calibrated to bottler spec sheets.
Brand spec match
Cabinet RAL color (Coca-Cola Red 484C, Pepsi Blue 287C), door curve radius ±0.3 mm, decal placement jig calibrated to bottler audit.
Door config
Single / double / triple door variants on snap-in divider modular mould. Capex drops from USD 280K → USD 95K per variant.
Tropical / temperate spec
Standard 21°C / tropical 43°C ambient (SASO / DEWA). Tropical-spec uses 60 mm wall foam (vs 45 mm), 4–6 W/m heated door perimeter.
Burst capacity
Steady 3K/day → peak 8K/day for 60-day bottler rollouts. Second high-pressure station add-on (+USD 280K) doubles burst.
Shared engineering reference
PU foam quality, testing and acceptance
Closed-cell ratio, density uniformity and thermal testing are documented once in our quality center.
Questions factory owners ask us
What's the typical investment for a 3,000 units/day beverage cooler line?
Can you supply lines compliant with Coca-Cola or PepsiCo cooler programs?
How do you handle door-foaming defects on glass-door coolers?
What is the lead time from contract to first shipment?
Do you support tropical-spec coolers for Middle East and Southeast Asia?
Service & Support
Warranty & Service
On-site intervention available in every region where we have delivered projects.
On-Site Installation
Our engineers fly to your factory to supervise installation, layout verification, and first-run production.
Commissioning + Tuning
Trial run + parameter tuning to your local raw material, climate, and target product spec — until throughput meets contract.
Operator Training
5-10 day on-site training for production team, QC, and maintenance — bilingual manuals + video tutorials provided.
3-Year Warranty + Spares
Core equipment 3-year warranty, electrical 2-year. Spare parts in stock with global express shipment 24h dispatch.
Cross-Sell · One-Partner Synergy
Pair this line with the rest of the factory
The product groups our refrigerator-factory customers buy alongside this line — for full-line synergy and one-partner accountability.
Production-Line Foaming System
High-pressure, low-pressure, spray or dispensing equipment is specified inside the production line that uses it.
Learn more
Refrigerator-grade Moulds
Vacuum-forming moulds for inner liners + foaming moulds for cabinet/door. 30-year mould-cluster network.
Learn more
PU Raw Materials System
BASF / Covestro / Wanhua MDI + Polyol — calibrated to your climate, foam density, and cycle time.
Learn more