4-Station Hydraulic Air-Curtain Cabinet Foaming Fixture — CE / ISO 9001-certified production lines by UREXCEED. Lead time 60 – 90 days, MOQ 1 set.
4-Station Hydraulic Air-Curtain Cabinet Foaming Fixture
4-station hydraulic foaming fixture for air-curtain refrigerated display cabinets (open-front merchandisers up to 4 × 1.8 × 0.55 m). Top/bottom flat-pressing clamp, water heating, 50 kW, 80–200 cabinets/shift.
Engineering reply within 24 hours
Quote + spec sheet + tailored sizing recommendation. WhatsApp answered 9 am–6 pm Beijing time.
Teknik Özellikler
- Layout Form
- 4-station fixture frame for air-curtain refrigerated display cabinet foaming
- Drive Method
- Hydraulic with top/bottom flat-pressing clamping
- Heating Method
- Water heating
- Number of Stations
- 4
- Cabinet Size Range (L×W×H)
- 4,000 × 1,800 × 550 mm
- Footprint (Overall L×W×H)
- Sized to fit factory hall (compact fixture frame)
- Foaming Material
- POL + Cyclopentane + ISO / POL + HCFC-141a + ISO / POL + HCFC-245fa + ISO
- Voltage / Frequency
- 380V · 50 Hz · Control voltage 24V
- Total Power
- Approx. 50 kW
- Compressed Air Requirement
- 0.5 MPa
- Best Fit Capacity
- ~80 – 200 air-curtain cabinets per shift
- Lead Time
- 60 – 90 days
- MOQ
- 1 set
Uygulamalar
- Open-front air-curtain refrigerated display cabinet (supermarket grab-and-go)
- Multi-tier air-curtain merchandiser (beverage / dairy / packaged meal)
- Convenience store open-front cooler
- Pharmacy / drugstore beverage cooler (open access)
- Fast-food chain refrigerated grab-and-go island
The 4-station air-curtain cabinet foaming fixture is a SPECIALIZED foaming frame for open-front air-curtain refrigerated display cabinets — the merchandiser type with no front door, just a cold-air-curtain seal. These cabinets need top-and-bottom flat-pressing during PU foaming to maintain the open-front frame geometry. The 4-station fixture batches the foaming for cost efficiency.
Why air-curtain cabinets need a dedicated fixture (not a generic line)
Air-curtain cabinets are NOT just refrigerators with a missing door. The open-front frame has unique structural challenges: the front opening must stay perfectly square through curing, top/bottom shelves need precise mounting tolerance for air-curtain seal effectiveness. Generic single-station machines without top-and-bottom flat-press cause front-frame warp that breaks the air curtain. The 4-station dedicated fixture solves this by clamping the entire envelope during cure.
Four reasons the 4-station dedicated fixture beats generic single-station for air-curtain
Data-driven advantages of the air-curtain-specific 4-station configuration.
Top + bottom flat-press clamping maintains front-frame squareness ±0.5 mm
Generic single-station clamps the cabinet walls but not the top + bottom independently. During PU rise, the open front frame warps 2–3 mm without dual flat-press. The 4-station dedicated fixture clamps top + bottom AND walls simultaneously, holding front-frame squareness at ±0.5 mm — the tolerance air-curtain seals require.
Batch 4 cabinets per cycle — capacity 80–200 cabinets/shift
Four cabinets foam in parallel per cycle. Throughput 80–200 cabinets/shift handles mid-volume air-curtain merchandiser OEM factories — typical convenience store / supermarket chain supplier output.
Cabinet envelope up to 4 × 1.8 × 0.55 m — long merchandiser support
Long-format air-curtain merchandisers (3–4 m supermarket grab-and-go islands) fit the fixture envelope. Generic cabinet machines typically max out at 2.5 m length — half the air-curtain range.
Modest capex — USD 180K–280K vs full air-curtain production line USD 600K+
For 1,000–5,000 air-curtain cabinets/year, the 4-station dedicated fixture pays back in 2 years. A full air-curtain dedicated line only makes sense above 10,000 cabinets/year.
How the 4-station batch cycle runs
4 cabinets enter simultaneously, foam in parallel under flat-press clamping, exit batch-mode in ~12 minutes per cycle.
- 1
Load (parallel) — 2 operators load 4 pre-skinned air-curtain cabinet shells onto 4 fixture positions. Top + bottom flat-press jaws open. ~90 sec.
- 2
Clamp — top + bottom flat-press jaws engage on all 4 cabinets simultaneously. Side walls clamp via hydraulic clamps. Whole envelope under pressure. ~20 sec.
- 3
Parallel injection — 4 separate PU dispense heads inject POL+ISO+cyclopentane (2.0–3.5 kg/cabinet) into each cabinet simultaneously. ~30 sec.
- 4
Heated cure — water-heating maintains fixtures at 48–55°C. Foam rises through cabinet walls + roof + bottom. ~8–10 min batch cure.
- 5
Batch demould + QC — 4 cabinets release together. Operator inspects front-frame squareness with reference gauge before downstream assembly. ~60 sec total.
FAQs — 4-station air-curtain cabinet foaming fixture
Investment + lead time?
Capacity 80–200 cabinets/shift — for what factory size?
Can it handle different cabinet variants in the same batch?
What's special about the top-and-bottom flat-press?
Cabinet size limits?
When NOT to use this fixture?
İlgili Ürünler
26-Station Ground-Rail PU Foaming Line for Refrigerator Doors — Closed-Loop Track Layout
Closed-loop ground-rail PU foaming line dedicated to refrigerator and cabinet DOOR foaming. 26 fixture stations on a continuous steel track, 20-sec cycle, 3,000–6,000 doors per shift. 2,000 × 900 mm fixture × 200 mm closing height — sized for door panels. Cyclopentane + ATEX Zone 1, steam or oil heating.
Linear Cabinet PU Foaming Line — 6 / 8 / 11 Stations Configurable
Linear in-line PU foaming for refrigerator cabinet body. Scalable from 6-station motor-driven (~800–2,500 cabinets/shift, small-medium factories) to 11-station hydraulic (~4,000–6,000 cabinets/shift, mainstream OEM). Multi-spec mixed-line production. Cabinet size 800–2,000 mm L × 450–2,000 mm W × 450–900 mm H. Water-heated, PID-controlled.
7-To-8 Station Rotary-Door PU Foaming Line (Door-Dedicated Hub)
Rotary (hub-type) door foaming line dedicated to refrigerator and cabinet DOOR foaming. 7–8 stations · 46-second cycle · compact 33 m² footprint · ~65 kW · fast variety changeover.
Cross-Sell · One-Partner Synergy
Match Your Production Line With Factory Solutions
Pick the factory type that matches your buyer market — we engineer the complete production line for that vertical.
Browse 13 Factory Solutions
Refrigerator / Chef Base / Freezer / Display Cabinet / Commercial Freezer + 8 specialized markets.
Learn more
PU Foaming Machines
High-pressure (cyclopentane / 2C / 3C) + low-pressure + spray-foam — pick the foaming line that matches your factory.
Learn more
Refrigerator-Grade Moulds
Vacuum-forming + foaming moulds engineered to your cabinet/door geometry. Custom mould design service available.
Learn moreService & Support
Warranty & Service
On-site intervention available in every region where we have delivered projects.
On-Site Installation
Our engineers fly to your factory to supervise installation, layout verification, and first-run production.
Commissioning + Tuning
Trial run + parameter tuning to your local raw material, climate, and target product spec — until throughput meets contract.
Operator Training
5-10 day on-site training for production team, QC, and maintenance — bilingual manuals + video tutorials provided.
3-Year Warranty + Spares
Core equipment 3-year warranty, electrical 2-year. Spare parts in stock with global express shipment 24h dispatch.
Sıkça Sorulan Sorular
What is the typical lead time?
What is the minimum order quantity?
Do you offer customization and OEM / ODM?
What certifications does this product have?
Komple bir soğutma çözümüne mi ihtiyacınız var?
UREXCEED, 6 ortak fabrika üzerinden kalıpları, köpük makinelerini, üretim hatlarını ve malzemeleri entegre eder. Kapasite hedefinizi söyleyin, 24 saat içinde yapılandırma ve teklif gönderelim.