4-Station Hydraulic Air-Curtain Cabinet Foaming Fixture — CE / ISO 9001-certified líneas de producción by UREXCEED. Lead time 60 – 90 days, MOQ 1 set.
4-Station Hydraulic Air-Curtain Cabinet Foaming Fixture
4-station hydraulic foaming fixture for air-curtain refrigerated display cabinets (open-front merchandisers up to 4 × 1.8 × 0.55 m). Top/bottom flat-pressing clamp, water heating, 50 kW, 80–200 cabinets/shift.
Engineering reply within 24 hours
Quote + spec sheet + tailored sizing recommendation. WhatsApp answered 9 am–6 pm Beijing time.
Especificaciones
- Layout Form
- 4-station fixture frame for air-curtain refrigerated display cabinet foaming
- Drive Method
- Hydraulic with top/bottom flat-pressing clamping
- Heating Method
- Water heating
- Number of Stations
- 4
- Cabinet Size Range (L×W×H)
- 4,000 × 1,800 × 550 mm
- Footprint (Overall L×W×H)
- Sized to fit factory hall (compact fixture frame)
- Foaming Material
- POL + Cyclopentane + ISO / POL + HCFC-141a + ISO / POL + HCFC-245fa + ISO
- Voltage / Frequency
- 380V · 50 Hz · Control voltage 24V
- Total Power
- Approx. 50 kW
- Compressed Air Requirement
- 0.5 MPa
- Best Fit Capacity
- ~80 – 200 air-curtain cabinets per shift
- Lead Time
- 60 – 90 days
- MOQ
- 1 set
Aplicaciones
- Open-front air-curtain refrigerated display cabinet (supermarket grab-and-go)
- Multi-tier air-curtain merchandiser (beverage / dairy / packaged meal)
- Convenience store open-front cooler
- Pharmacy / drugstore beverage cooler (open access)
- Fast-food chain refrigerated grab-and-go island
The 4-station air-curtain cabinet foaming fixture is a SPECIALIZED foaming frame for open-front air-curtain refrigerated display cabinets — the merchandiser type with no front door, just a cold-air-curtain seal. These cabinets need top-and-bottom flat-pressing during PU foaming to maintain the open-front frame geometry. The 4-station fixture batches the foaming for cost efficiency.
Why air-curtain cabinets need a dedicated fixture (not a generic line)
Air-curtain cabinets are NOT just refrigerators with a missing door. The open-front frame has unique structural challenges: the front opening must stay perfectly square through curing, top/bottom shelves need precise mounting tolerance for air-curtain seal effectiveness. Generic single-station machines without top-and-bottom flat-press cause front-frame warp that breaks the air curtain. The 4-station dedicated fixture solves this by clamping the entire envelope during cure.
Four reasons the 4-station dedicated fixture beats generic single-station for air-curtain
Data-driven advantages of the air-curtain-specific 4-station configuration.
Top + bottom flat-press clamping maintains front-frame squareness ±0.5 mm
Generic single-station clamps the cabinet walls but not the top + bottom independently. During PU rise, the open front frame warps 2–3 mm without dual flat-press. The 4-station dedicated fixture clamps top + bottom AND walls simultaneously, holding front-frame squareness at ±0.5 mm — the tolerance air-curtain seals require.
Batch 4 cabinets per cycle — capacity 80–200 cabinets/shift
Four cabinets foam in parallel per cycle. Throughput 80–200 cabinets/shift handles mid-volume air-curtain merchandiser OEM factories — typical convenience store / supermarket chain supplier output.
Cabinet envelope up to 4 × 1.8 × 0.55 m — long merchandiser support
Long-format air-curtain merchandisers (3–4 m supermarket grab-and-go islands) fit the fixture envelope. Generic cabinet machines typically max out at 2.5 m length — half the air-curtain range.
Modest capex — USD 180K–280K vs full air-curtain production line USD 600K+
For 1,000–5,000 air-curtain cabinets/year, the 4-station dedicated fixture pays back in 2 years. A full air-curtain dedicated line only makes sense above 10,000 cabinets/year.
How the 4-station batch cycle runs
4 cabinets enter simultaneously, foam in parallel under flat-press clamping, exit batch-mode in ~12 minutes per cycle.
- 1
Load (parallel) — 2 operators load 4 pre-skinned air-curtain cabinet shells onto 4 fixture positions. Top + bottom flat-press jaws open. ~90 sec.
- 2
Clamp — top + bottom flat-press jaws engage on all 4 cabinets simultaneously. Side walls clamp via hydraulic clamps. Whole envelope under pressure. ~20 sec.
- 3
Parallel injection — 4 separate PU dispense heads inject POL+ISO+cyclopentane (2.0–3.5 kg/cabinet) into each cabinet simultaneously. ~30 sec.
- 4
Heated cure — water-heating maintains fixtures at 48–55°C. Foam rises through cabinet walls + roof + bottom. ~8–10 min batch cure.
- 5
Batch demould + QC — 4 cabinets release together. Operator inspects front-frame squareness with reference gauge before downstream assembly. ~60 sec total.
FAQs — 4-station air-curtain cabinet foaming fixture
Investment + lead time?
Capacity 80–200 cabinets/shift — for what factory size?
Can it handle different cabinet variants in the same batch?
What's special about the top-and-bottom flat-press?
Cabinet size limits?
When NOT to use this fixture?
Productos relacionados
26-Station Ground-Rail PU Foaming Line for Refrigerator Doors — Closed-Loop Track Layout
Closed-loop ground-rail PU foaming line dedicated to refrigerator and cabinet DOOR foaming. 26 fixture stations on a continuous steel track, 20-sec cycle, 3,000–6,000 doors per shift. 2,000 × 900 mm fixture × 200 mm closing height — sized for door panels. Cyclopentane + ATEX Zone 1, steam or oil heating.
Linear Cabinet PU Foaming Line — 6 / 8 / 11 Stations Configurable
Linear in-line PU foaming for refrigerator cabinet body. Scalable from 6-station motor-driven (~800–2,500 cabinets/shift, small-medium factories) to 11-station hydraulic (~4,000–6,000 cabinets/shift, mainstream OEM). Multi-spec mixed-line production. Cabinet size 800–2,000 mm L × 450–2,000 mm W × 450–900 mm H. Water-heated, PID-controlled.
7-To-8 Station Rotary-Door PU Foaming Line (Door-Dedicated Hub)
Rotary (hub-type) door foaming line dedicated to refrigerator and cabinet DOOR foaming. 7–8 stations · 46-second cycle · compact 33 m² footprint · ~65 kW · fast variety changeover.
Cross-Sell · One-Partner Synergy
Match Your Production Line With Factory Solutions
Pick the factory type that matches your buyer market — we engineer the complete production line for that vertical.
Browse 13 Factory Solutions
Refrigerator / Chef Base / Freezer / Display Cabinet / Commercial Freezer + 8 specialized markets.
Learn more
PU Foaming Machines
High-pressure (cyclopentane / 2C / 3C) + low-pressure + spray-foam — pick the foaming line that matches your factory.
Learn more
Refrigerator-Grade Moulds
Vacuum-forming + foaming moulds engineered to your cabinet/door geometry. Custom mould design service available.
Learn moreService & Support
Garantía y Servicio
Intervención in situ disponible en todas las regiones donde hemos entregado proyectos.
On-Site Installation
Our engineers fly to your factory to supervise installation, layout verification, and first-run production.
Commissioning + Tuning
Trial run + parameter tuning to your local raw material, climate, and target product spec — until throughput meets contract.
Operator Training
5-10 day on-site training for production team, QC, and maintenance — bilingual manuals + video tutorials provided.
3-Year Warranty + Spares
Core equipment 3-year warranty, electrical 2-year. Spare parts in stock with global express shipment 24h dispatch.
Preguntas frecuentes
¿Cuál es el plazo de entrega típico?
¿Cuál es la cantidad mínima de pedido?
¿Ofrecen personalización y OEM / ODM?
¿Qué certificaciones tiene este producto?
¿Necesita una solución completa de refrigeración?
UREXCEED integra moldes, máquinas de espumado, líneas de producción y materiales en 6 fábricas socias. Díganos su objetivo de capacidad y responderemos con una configuración y cotización en 24 horas.