Manual Rotary 4-Station Door Foaming Specialty Machine — CE / ISO 9001-certified production lines by UREXCEED. Lead time 45 – 75 days, MOQ 1 set.
Manual Rotary 4-Station Door Foaming Specialty Machine
Manual rotary 4-station door foaming machine for R&D, pilot, sample production and low-volume premium refrigerator door foaming. 90-second cycle, 30 kW, 150–400 doors/shift. Cost-effective sample-run option before committing to full crawler / hub line.
Engineering reply within 24 hours
Quote + spec sheet + tailored sizing recommendation. WhatsApp answered 9 am–6 pm Beijing time.
Spesifikasi Teknis
- Layout Form
- Manual rotary 4-station door foaming specialty machine
- Drive Method
- Manual rotation + hydraulic clamping (workshop-grade)
- Heating Method
- Water heating
- Number of Stations
- 4
- Fixture Template Size
- 1,400 × 900 mm (door panel)
- Mold Closing Height
- 200 mm
- Production Cycle Time
- ~90 seconds per door (manual cycle)
- Foaming Material
- POL + Cyclopentane + ISO / POL + HCFC-141a + ISO / POL + HCFC-245fa + ISO
- Voltage / Frequency
- 380V · 50 Hz · Control voltage 24V
- Total Power
- Approx. 30 kW
- Compressed Air Requirement
- 0.5 MPa
- Best Fit Capacity
- ~150 – 400 doors per shift (low-volume / pilot / sample)
- Lead Time
- 45 – 75 days
- MOQ
- 1 set
Aplikasi
- Sample / pilot door foaming for new cabinet variants
- Low-volume premium refrigerator door (small batch certified)
- R&D / prototype door foaming (variant verification before main line)
- Trial production of new door materials / formulations
- Workshops with <500 doors/shift demand
The manual rotary 4-station door foaming specialty machine is the R&D / pilot / sample-run equivalent for door production. Same principle as the single-station cabinet machine: same fixture template as production lines, but one cycle at a time with manual rotation. Use it for new door design verification, low-volume premium variants, or as a cost-effective entry into refrigerator door production.
When manual 4-station door specialty makes sense
Buy this machine when (a) your daily door demand is < 500 (any production line is over-investment), (b) you're verifying new door designs before committing to full line tooling, (c) you produce premium / R&D variants in small batches where unit cost matters less than time-to-market. Many refrigerator OEM factories use this for prototype work + main line for volume.
Four reasons manual 4-station beats automated lines for R&D / pilot door work
Engineering and economics of the manual specialty configuration.
Capex USD 60K–120K — 1/8 of a 6-station servo line
6-station servo line: USD 480K–720K. Manual 4-station specialty: USD 60K–120K turnkey. For R&D / pilot / specialty work where unit throughput is secondary, the manual is the right capex sizing.
Same fixture template as production lines — direct trial-to-production path
The 1,400 × 900 × 200 mm fixture matches the 16-station crawler line exactly. A door design verified on the manual goes straight to crawler tooling — no re-engineering. R&D cycle shortens 4–8 weeks vs trialing on incompatible smaller fixtures.
Capacity 150–400 doors/shift covers small-batch + variant trial
Manual cycle ~90 seconds per door = ~320 doors/shift theoretical, 150–400 realistic with variant changes. Handles R&D pilot batches, premium specialty SKUs, and low-volume certified doors (vaccine / pharma refrigerator).
Lower operator skill requirement — manual = easier training
No PLC recipe management, no servo calibration, no high-pressure hydraulics. 1 operator + 1 PU machine operator. New operator productive within 2–3 days. Servo / crawler lines need 5–7 days training + ongoing PLC literacy.
How the manual 4-station rotary cycle runs
90-second cycle per door. 4 stations rotate manually with hydraulic clamping at each station.
- 1
Station 1 (Load) — operator loads pre-skinned door panel + inner liner onto fixture position 1. Manual position-check with reference marks. ~30 sec.
- 2
Station 1 (Clamp + Inject) — operator engages hydraulic clamp via foot-pedal. PU mix-head dispenses POL+ISO+cyclopentane (0.7–1.4 kg/door). ~20 sec.
- 3
Rotate to Station 2 — operator manually rotates hub 90° to advance the door to station 2 for curing. ~5 sec rotation.
- 4
Stations 2–4 (Manual cure rotation) — door cures in heated fixture (water-jacket 45–55°C) for ~3.5 minutes across 3 stations. Operator works on next door in parallel. ~210 sec.
- 5
Station 4 (Demould) — operator releases clamp, lifts cured door onto outfeed cart. Spot-check density before downstream. ~25 sec.
FAQs — manual rotary 4-station door foaming specialty machine
Investment + lead time?
Capacity 150–400 doors/shift — what kind of factory size?
Can it scale to a full line later?
What's the operator skill requirement?
What end products does it foam?
When NOT to buy a manual 4-station door specialty?
Produk Terkait
26-Station Ground-Rail PU Foaming Line for Refrigerator Doors — Closed-Loop Track Layout
Closed-loop ground-rail PU foaming line dedicated to refrigerator and cabinet DOOR foaming. 26 fixture stations on a continuous steel track, 20-sec cycle, 3,000–6,000 doors per shift. 2,000 × 900 mm fixture × 200 mm closing height — sized for door panels. Cyclopentane + ATEX Zone 1, steam or oil heating.
Linear Cabinet PU Foaming Line — 6 / 8 / 11 Stations Configurable
Linear in-line PU foaming for refrigerator cabinet body. Scalable from 6-station motor-driven (~800–2,500 cabinets/shift, small-medium factories) to 11-station hydraulic (~4,000–6,000 cabinets/shift, mainstream OEM). Multi-spec mixed-line production. Cabinet size 800–2,000 mm L × 450–2,000 mm W × 450–900 mm H. Water-heated, PID-controlled.
7-To-8 Station Rotary-Door PU Foaming Line (Door-Dedicated Hub)
Rotary (hub-type) door foaming line dedicated to refrigerator and cabinet DOOR foaming. 7–8 stations · 46-second cycle · compact 33 m² footprint · ~65 kW · fast variety changeover.
Cross-Sell · One-Partner Synergy
Match Your Production Line With Factory Solutions
Pick the factory type that matches your buyer market — we engineer the complete production line for that vertical.
Browse 13 Factory Solutions
Refrigerator / Chef Base / Freezer / Display Cabinet / Commercial Freezer + 8 specialized markets.
Learn more
PU Foaming Machines
High-pressure (cyclopentane / 2C / 3C) + low-pressure + spray-foam — pick the foaming line that matches your factory.
Learn more
Refrigerator-Grade Moulds
Vacuum-forming + foaming moulds engineered to your cabinet/door geometry. Custom mould design service available.
Learn moreService & Support
Warranty & Service
On-site intervention available in every region where we have delivered projects.
On-Site Installation
Our engineers fly to your factory to supervise installation, layout verification, and first-run production.
Commissioning + Tuning
Trial run + parameter tuning to your local raw material, climate, and target product spec — until throughput meets contract.
Operator Training
5-10 day on-site training for production team, QC, and maintenance — bilingual manuals + video tutorials provided.
3-Year Warranty + Spares
Core equipment 3-year warranty, electrical 2-year. Spare parts in stock with global express shipment 24h dispatch.
Pertanyaan Umum
What is the typical lead time?
What is the minimum order quantity?
Do you offer customization and OEM / ODM?
What certifications does this product have?
Butuh solusi pendingin lengkap?
UREXCEED mengintegrasikan cetakan, mesin foam, lini produksi & material dari 6 pabrik mitra. Beri tahu target kapasitas Anda, 24 jam kami sampaikan konfigurasi & penawaran.